Fuel pumps

Fuel pumps — including the DW400 (415 l/h) and dual pump adapters and brackets from Chargertech. E85 and methanol resistant. For enough flow at any power level.

About this category

Fuel pumps

At full power the fuel pump has to deliver enough flow and pressure — a shortfall here means a lean mixture and engine damage. We supply powerful pumps such as the DW400 plus the adapters and brackets to mount one or two neatly.

What will you find here?

  • High-flow pumps — for example the DW400 at 415 l/h, more than enough for heavily tuned engines
  • Dual-pump setups — adapters and brackets (AN-6/8/10, various center-to-center sizes) to run two pumps in parallel for extra flow
  • E85 and methanol — methanol-resistant versions for aggressive fuels

What to look for?

  • Flow at your pressure — pump capacity drops at higher pressure; choose by the flow at your operating pressure, not the peak value
  • Voltage — flow rises considerably with good wiring and voltage; a thin wire costs output
  • Feed and return — match the line diameter to the pump

Mechanic's tip

Never let a fuel pump run dry — they are cooled and lubricated by the fuel. Keep the tank at least a quarter full when driving hard, or use a surge tank. Make sure you have a clean, heavy ground connection; wiring that is too thin is the most common cause of disappointing flow. Need help? Contact us — we're happy to help.

Frequently asked questions

What fuel pump do I need for my power level?
Choose by the flow at your operating pressure, not the peak rating: pump capacity drops at higher pressure. For E85, count on about 30% more flow than for gasoline.
When do I need a dual fuel pump setup?
When one pump can't deliver enough flow at full power. With our adapters and brackets you can run two pumps in parallel for extra capacity.
Why does my pump deliver less than rated?
Often because of wiring that's too thin or a poor ground; flow rises significantly with a good, heavy-gauge power feed. And never let the pump run dry.