Wastegates — extern, intern & elektronisch

Wastegates and boost control — internal, external and electronic GenV eWG from Turbosmart and Haltech. For precise, repeatable boost control on any turbo build.

About this category

Wastegates and boost control

The wastegate determines how much exhaust gas is routed past the turbine and therefore how high the boost pressure rises. An accurate, repeatable wastegate is the foundation of a reliable turbo build. Our range runs from compact internal control to large external and fully electronic wastegates — with Turbosmart and Haltech GenV as the backbone.

Types of wastegate

  • Internal wastegate — integrated in the turbo, compact and simple. Fine up to medium-high power levels, but limited in control range
  • External wastegate — separate valve on the manifold that vents independently of the turbine. More stable boost control at higher power levels. Common sizes: 38, 40, 45, 50 and 60 mm
  • Electronic (GenV eWG) — Turbosmart and Haltech actuate the valve electronically for the fastest, most precise control: Powergate 60, Progate 50, Hypergate 45 and Comp Gate 40

What to look for?

  • Valve diameter and flow — must match turbo size and power target. Too small and boost pressure rises unintentionally (boost creep)
  • Spring pressure — determines the base boost pressure; many wastegates come with interchangeable springs
  • Connection — V-band is standard on modern external wastegates. Check that your manifold has the right flange

Mechanic's tip

An external wastegate belongs on the manifold ahead of the turbine, in a spot with good gas flow — not in a dead corner. Route the dump pipe back into the downpipe (a screamer pipe only on the track) and use a heat-resistant gasket on the flange. Set the base boost pressure mechanically with the spring first and fine-tune above that with a boost controller. Not sure? Contact us — we're happy to help.

Wastegate or boost controller?

The wastegate lays the mechanical foundation; an electronic boost controller regulates on top of that for faster spool and a flatter boost curve. For most street and track builds, the combination of a good external wastegate with a boost controller is ideal. Need a complete turbo? Check out our universal turbos.

Frequently asked questions

What's the difference between an internal and an external wastegate?
An internal wastegate sits in the turbo and is compact but has a limited control range; an external wastegate vents separately from the turbine and gives more stable boost control at higher power levels.
What wastegate size do I need?
Match valve diameter and flow to turbo size and power goal. A wastegate that's too small lets boost pressure rise uncontrolled (boost creep).
Do I need a boost controller as well as a wastegate?
The wastegate sets the mechanical baseline; an electronic boost controller works on top of it for faster spool and a flatter boost curve. For most builds the combination is ideal.