- Home ›
- All categories›
- Electronics›
- Management systems›
- Displays ›
- EcuMaster ADU (Advanced Display Unit) 7 Inch
EcuMaster
EcuMaster ADU (Advanced Display Unit) 7 Inch
EcuMaster ADU (Advanced Display Unit) 7 Inch
Pay securely with
Or pay in 3 instalments of €449,66 with Klarna
Couldn't load pickup availability
Specifications
Specifications
Product details
Product details
We are proud to announce the new ECUMASTER Racing Dash family of products. We designed the ADU5 and ADU7 in response to market demand for a cost-effective dash display with logging capabilities. Our specific goal was to create a fully customizable, feature-rich, high-end solution for competitive drivers. We worked with professional drivers and race engineers and designed the ADU to meet their requirements.
Above all, the ADU is designed to display all critical information in an easy-to-read way, together with a comprehensive strategy for displaying warnings.
Our Advanced Display Units are available in 5" and 7" versions. Both versions have a high-quality, highly visible, anti-reflective screen, guaranteeing perfect visibility in all lighting conditions. The ADU comes with multiple preconfigured pages that the end user can customize to show the data needed during each race phase (e.g. practice, qualifying, race, troubleshooting, etc.). Pages can be changed manually or automatically (based on defined conditions). Every channel shown on a page (gauges, icons, text, etc.) can easily be adjusted in real time with user-friendly Windows-based software. Our comprehensive overlay system makes it easy to show important data across multiple pages (e.g. low oil pressure, fastest lap, etc.) regardless of the page actually being displayed.
The ADU is also equipped with 15 ultra-bright RGB LEDs that can be used as an advanced gear-dependent shift light and can be customized with user-defined logic (for warnings, low fuel level, etc.). Using IR beacons or a GPS system, the display turns into a powerful lap timer with a predictive timing function. Selecting the qualifying page enables a "Qualifying mode" that uses advanced predictive lap timing based on automatically updated "best" reference laps.
User-configurable timers can be set up for extra functionality (e.g. pit stop timer, etc.). The ADU also supports thermal cameras for monitoring brake pad or tire temperatures (up to 16 points per tire). Communication with other devices in the car is provided through two built-in, independent CAN-BUS communication ports. CAN templates are supplied for the most popular ECUs and are fully configurable, so you can connect our hardware to virtually any engine management system.
To make sure all functions work seamlessly, our device is based on a 32-bit automotive controller paired with a state-of-the-art graphics processor. This combination offers the perfect working environment for any engineer or driver and guarantees anti-aliased, high-quality graphics at 50 frames per second. For further data analysis, data channels can be logged to a USB flash drive at a frequency of up to 500Hz. All these "Must Have" features and more are housed in a rugged, custom CNC-machined, black anodized enclosure.
Free, easy-to-install firmware upgrades also extend the system's capabilities (e.g. new strategies, trigger patterns, CAN data streams).
General specifications:
Operating voltage: 6-22V, immune to transients according to ISO 7637, with reverse polarity protection
CPU: 32 bits, automotive, 90MIPS Temperature range: -30°C to 80°C
Enclosure: Anodized aluminum, CNC-machined, IP61 Connector: Automotive 36-way AMP connector
5" display: Anti-glare TFT, 800x480, active area 108x64,8 mm, luminance 600 cd/m2
7" display: Anti-glare TFT, 800x480, active area 154,08x85,92 mm, luminance 500 cd/m2
Warnings: 15 x ultra-bright RGB LEDs
Communication: CAN: 2 x CAN 2.0B (250, 500, 1000 kbps) independent Serial: RS232 (Rx, Tx)
USB: Yes, for data logging (dash programming must be done via CAN, using a CAN-to-USB adapter, Peak Pcan or Kvaser cable)
Inputs: Analog inputs: 8 analog inputs, 10 bits, 500Hz, software-selectable pull-ups/pull-downs
Digital inputs: 8 inputs with user-defined sensitivity Outputs: General purpose 2 x protected 3A low-side outputs
Other:
Accelerometer: 3-axis gyroscope and 3-axis acceleration sensor
Light sensor: Built-in for automatic brightness
Temperature sensor: Built-in to monitor the device's internal temperature
Real-time clock: Built-in with battery backup
Functions: Lap timer: Lap timer with memory, predictive timing, triggered by a beacon or GPS
Customization: 48 available pages, user-defined content, custom images allowed
Functions: Math channels, logic functions
Overlays: Yes, user-defined
CAN stream: User-defined, up to 48 input messages, predefined streams for popular ECUs
Logging: Memory: USB flash memory Speed: Up to 500Hz per channel Real-time clock: Yes
Supported ECUs:
- AEM
- Ecumaster PMU
- Emtron
- Hondata Kpro
- Life Racing
- LINK ECU
- Megasquirt 2 & 3
- Pectel SQ-6
- Syvecs
- VI-PEC
- OBD 2 over CAN ecus
- Any ECU that can send data via CAN BUS
Shipping & returns
Shipping & returns
Shipping
- Netherlands: free from €150, otherwise €7.95
- Belgium: free from €250, otherwise €12.50
- Germany: free from €250, otherwise €12.50
- Rest of the EU: €25
Delivery time
- In stock: ordered before 14:00, shipped the same day
- Backorder: the delivery time is shown on the product
- Pick up in Cuijk: same day possible (after confirmation)
Returns
- 30-day right of withdrawal
- Unused and in the original packaging
- Return shipping is at your own expense
- Refund within 14 days
Delen
