- Home ›
- All categories›
- Electronics›
- Management systems›
- Displays ›
- EcuMaster ADU (Advanced Display Unit) 7 Inch Autosport
EcuMaster
EcuMaster ADU (Advanced Display Unit) 7 Inch Autosport
EcuMaster ADU (Advanced Display Unit) 7 Inch Autosport
Pay securely with
Or pay in 3 instalments of €625 with Klarna
Couldn't load pickup availability
Specifications
Specifications
Product details
Product details
The ADU7 AutoSport Display has the same specifications as the regular ADU7, but instead of the AMP connector on the original ADU7 it has a 37-position AutoSport connector. AutoSport connectors are used at the highest levels of motorsport and are the most compact and rugged connectors available. This connector uses solid gold-plated contacts, so make sure you have the right tools on hand.
We are proud to announce the new ECUMASTER Racing Dash family of products. We designed the ADU5 and ADU7 in response to market demand for a cost-effective dash display with logging capability. Our specific goal was to create a fully customizable, feature-rich, high-quality solution for competitive drivers. We worked with professional drivers and race engineers and designed the ADU to meet their requirements.
Above all, the ADU is designed to show all critical information in an easy-to-read way, together with a comprehensive warning display strategy.
Our Advanced Display Units are available in 5" and 7" versions. Both versions have a high-quality, highly visible, anti-glare screen, guaranteeing perfect visibility in all lighting conditions. The ADU comes with several preconfigured pages that the end user can customize to show the data needed during each phase of racing (e.g. practice, qualifying, race, troubleshooting, etc.). Pages can be changed manually or automatically (based on defined conditions). Every channel shown on a page (gauges, icons, text, etc.) can easily be customized in real time with user-friendly Windows-based software. Our comprehensive overlay system makes it easy to show important data across multiple pages (e.g. low oil pressure, fastest lap, etc.) regardless of the page actually displayed.
The ADU is also equipped with 15 ultra-bright RGB LEDs that can be used as an advanced gear-dependent shift light and can be customized with user-defined logic (for warnings, low fuel level, etc.). Using IR beacons or a GPS system turns the display into a powerful lap timer with a predictive timing function. Selecting the qualifying page activates a "Qualifying mode" that uses advanced predictive lap timing based on automatically updated "best" reference laps.
User-configurable timers can be set up for extra functionality (e.g. pit stop timer, etc.). The ADU also supports thermal cameras for monitoring brake pad or tire temperatures (up to 16 points per tire). Communication with other devices in the car is provided by two built-in, independent CAN-BUS communication ports. CAN templates are supplied for the most popular ECUs and are fully configurable, so you can connect our hardware to virtually any engine management system.
To make sure all functions work seamlessly, our device is based on a 32-bit automotive controller paired with a state-of-the-art graphics processor. This combination provides the perfect working environment for any engineer or driver and guarantees anti-aliased, high-quality graphics at 50 frames per second. For further data analysis, data channels can be logged to a USB flash drive at a rate of up to 500Hz. All these "Must Have" features and more are housed in a rugged, custom CNC-machined, black anodized enclosure.
Free, easy-to-install firmware upgrades also expand the system's capabilities (e.g. new strategies, trigger patterns, CAN data streams).
General specifications:
Operating voltage: 6-22V, transient-immune according to ISO 7637, with reverse polarity protection
CPU: 32 bits, automotive, 90MIPS Temperature range: -30°C to 80°C
Enclosure: Anodized aluminum, CNC-machined, IP61 Connector: Automotive 36-way AMP connector
5" display: Anti-glare TFT, 800x480, active area 108x64,8 mm, brightness 600 cd/m2
7" display: Anti-glare TFT, 800x480, active area 154,08x85,92 mm, brightness 500 cd/m2
Warnings: 15 x ultra-bright RGB LEDs
Communication: CAN: 2 x CAN 2.0B (250, 500, 1000 kbps) independent Serial: RS232 (Rx, Tx)
USB: Yes, for data logging (dash programming must be done via CAN, using a CAN-to-USB adapter, Peak Pcan or Kvaser cable)
Inputs: Analog inputs: 8 analog inputs, 10 bits, 500Hz, software-selectable pull-ups/pull-downs
Digital inputs: 8 inputs with user-defined sensitivity Outputs: General purpose 2 x protected 3A low-side outputs
Other:
Accelerometer: 3-axis gyroscope and 3-axis acceleration sensor
Light sensor: Built in for automatic brightness
Temperature sensor: Built in to monitor the device's internal temperature
Real-time clock: Built in with battery backup
Features: Lap timer: Lap timer with memory, predictive timing, triggered by a beacon or GPS
Customization: 48 available pages, user-defined content, custom images allowed
Functions: Math channels, logic functions
Overlays: Yes, user-defined
CAN stream: User-defined, up to 48 input messages, predefined streams for popular ECUs
Logging: Memory: USB flash memory Rate: Up to 500Hz per channel Real-time clock: Yes
Supported ECUs:
- AEM
- Ecumaster PMU
- Emtron
- Hondata Kpro
- Life Racing
- LINK ECU
- Megasquirt 2 & 3
- Pectel SQ-6
- Syvecs
- VI-PEC
- OBD 2 over CAN ecus
- Any ECU that can send data over CAN BUS
Shipping & returns
Shipping & returns
Shipping
- Netherlands: free from €150, otherwise €7.95
- Belgium: free from €250, otherwise €12.50
- Germany: free from €250, otherwise €12.50
- Rest of the EU: €25
Delivery time
- In stock: ordered before 14:00, shipped the same day
- Backorder: the delivery time is shown on the product
- Pick up in Cuijk: same day possible (after confirmation)
Returns
- 30-day right of withdrawal
- Unused and in the original packaging
- Return shipping is at your own expense
- Refund within 14 days
Delen
